Painting cost per square foot in the US
On this page
Painters often quote by the square foot, and clients often ask for that number. This guide shows what published US sources say, the date printed on each page, and what each square foot measures. It also shows how a price per square foot is built, with a worked example that uses made-up numbers.
The ranges below come from websites, not from our records and not from painters' price books. Use them to check that your own number is in a sensible area. Your own rates, hours and margin decide your price.
What the published ranges say
We read these pages on October 29, 2026. The date is the one printed on each page, because an old range may no longer match today's costs.
| Source | Date on the page | What it covers | Range, USD per sq ft |
|---|---|---|---|
| TaskRabbit, outdoor painting | Updated October 1, 2026 | Exterior, all materials | $1.00 to $4.50 |
| Wood | $1.00 to $3.00 | ||
| Vinyl | $1.00 to $3.50 | ||
| Brick | $1.50 to $5.00 | ||
| Stucco | $1.50 to $4.00 | ||
| Fiber cement | $1.50 to $3.00 | ||
| TaskRabbit, painting | Updated October 1, 2026 | Interior walls, full room | $2 to $6 |
| Interior walls, average by surface | $1 to $2 | ||
| Ceilings | $1 to $2 in one section, $1 to $3 in a table on the same page | ||
| Fixr, house painting | Updated January 31, 2025 | Interior, per sq ft of the home's floor space, with labor and supplies | $5.75 to $10.70 |
| Improovy, exterior painting | Article of April 27, 2023, with 2024 prices | Exterior, US average per sq ft of the house | $3.03 average, within $2.34 to $3.72 |
| Vinyl siding | $2.11 to $3.35 | ||
| Brick | $3.15 to $5.02 |
What each square foot measures
This is the part that most often makes two ranges look different when they are not.
- TaskRabbit does not define its square foot on the pages we read.
- Fixr says the rate is per square foot of the home's floor space, and that it covers labor, paint and supplies.
- Improovy gives its exterior figures per square foot but does not say whether that means floor area or wall area.
A square foot of floor is not a square foot of wall, so a floor-based range and a wall-based range cannot be put side by side.
Where the sources disagree
- Interior. TaskRabbit's full-room figure is $2 to $6. Fixr's is $5.75 to $10.70 per square foot of floor, with supplies included. Those are different units, so the gap does not tell you that one is wrong. Use the one that matches how you measure.
- Exterior. TaskRabbit's all-materials range ($1.00 to $4.50) is much wider than Improovy's ($2.34 to $3.72). Improovy's US average of $3.03 falls inside TaskRabbit's range.
- Ceilings. The same TaskRabbit page gives $1 to $2 in one section and $1 to $3 in a table. We show both.
Sources we could not use
We also tried Angi, HomeAdvisor, Housecall Pro, Bankrate, Forbes, Credible, HomeGuide, Homewyse and Thumbtack. Some of them blocked our reader, some did not return the page, and the ones we could read did not give a per-square-foot figure. The part of NerdWallet's article we could read gave only whole-house averages, about $2,000 for the inside and just over $3,100 for the outside. We have not used any of those numbers.
How a price per square foot is built
A price is the sum of four parts:
- Labor: your hours multiplied by your labor cost per hour. Your hours come from jobs you have timed, not from a guide.
- Materials: paint, primer, caulk, tape, plastic and other supplies.
- Overhead: insurance, truck, tools, phone and your own office time.
- Profit: what you keep above your costs.
The price per square foot is the result, not an input: price divided by the square feet you paint. Quoting by the square foot is fine when the scope is written out, so the client knows exactly which surfaces and how many coats.
Each part has its own guide. For labor, read How much to charge per hour as a painter. For overhead and profit, read Painting overhead and profit, with the math.
A worked example with made-up numbers
These numbers are illustrative. They show the method and are not a price or a benchmark. The assumptions are: 1,000 square feet of wall, two coats, 100 square feet per hour per coat, $50 per hour of labor, paint at 350 square feet per gallon and $40 per gallon, $60 of supplies, and 20% for overhead and profit.
| Item | Calculation | Amount |
|---|---|---|
| Labor | 1,000 × 2 coats = 2,000 sq ft; 2,000 ÷ 100 = 20 h; 20 h × $50 | $1,000 |
| Paint | 2,000 ÷ 350 = 5.7, rounded up to 6 gal; 6 gal × $40 | $240 |
| Supplies | assumed | $60 |
| Subtotal | $1,300 | |
| Overhead and profit | 20% of $1,300 | $260 |
| Price to the client | $1,560 |
Per square foot of wall: $1,560 ÷ 1,000 sq ft = $1.56 per sq ft.
Read $1.56 as the result of these made-up inputs. Your own hours, your own paint and your own margin will give a different number.
How to use these ranges
- Compare your number with a published range only as a sense check, and check what the range measures first.
- If your number is far outside the range, look first at your hours and the scope, not at the range.
- For gallons and square feet of wall and ceiling, use the paint calculator.
- For the step-by-step method, read how to estimate a painting job.
- For the words you use in a proposal, see the painting terms glossary.
Each painter sets their own prices
Published ranges come from sites that collect prices from many jobs and many markets. A real price depends on local labor rates, the condition of the surfaces, access, the crew, and the margin you need. Set your rates in your own price book.
QuetzalQuote is an iPhone app for independent painters in the US. The prices in an estimate come from your own price book, and the AI never sets a price.